[KCarney]

Tom,

I'm getting some strange errors when using UBUSB. See below




After clicking ok it seems to finish successfully and boots fine, although UBCD4Win does not boot at all from either entry in the syslinux menu. Haven't tried grub4dos, I don't prefer to use it.

[pcuser]

The bottom UBCD4Win entry in syslinux.cfg is the one that UBUSB creates and there's a typo in it. Change "chain32" to "chain.c32". Remove the top one that uses UBCD4Win.BSS.

I've seen the service errors before but I don't know how to reproduce it. I guess I just need to add better error handling in that area.

Thanks for the report.

[KCarney]

Here's detail from UBUSB.log, I didn't realize it had logging. Sweet!

6/24/2010 3:02:19 PM - ImDisk service is already installed on this computer
6/24/2010 3:02:19 PM - Unable to start ImDisk service!
6/24/2010 3:05:08 PM - Z:\UBCD4WIN\imdisk.exe -a -f Z:\UBCD4WIN\iso_root\kicker.img -m X: -v 1
6/24/2010 3:05:08 PM - ImDisk is not running.  Kicker files will not be copied to the image file.
6/24/2010 3:05:08 PM - Z:\UBCD4WIN\imdisk.exe -D -m X:
6/24/2010 3:05:10 PM - ImDisk service was unable to be stopped!
6/24/2010 3:06:13 PM - ImDisk service was already installed on this computer and will not be removed

I don't think I have Imdisk installed anywhere, checked programs and services on XP

[burnzarelli]

I am having this issue at the end of the build.


Heres the ususb.log data



6/25/2010 12:29:13 PM - UBUSB Version 1.0.51

6/25/2010 12:29:13 PM - Windows XP Service Pack 3 (5.1.2600)
6/25/2010 12:29:13 PM - Platform ID = 2
6/25/2010 12:29:13 PM - 32-bit

6/25/2010 12:29:31 PM - Current Options...

6/25/2010 12:29:31 PM - [Options]
6/25/2010 12:29:31 PM - Don't Modify MBR Boot Code=0
6/25/2010 12:29:31 PM - Don't Modify Partition Table=0
6/25/2010 12:29:31 PM - Don't Format Partition=0
6/25/2010 12:29:31 PM - Filesystem=Fat32 - LBA
6/25/2010 12:29:31 PM - BootLoader=Grub4dos
6/25/2010 12:29:31 PM - BartPE-Folder=C:\UBCD\BartPE
6/25/2010 12:29:31 PM - Don't Copy BartPE Folder=0
6/25/2010 12:29:31 PM - Create CD Image for USB Boot with No Bios Support=1

6/25/2010 12:29:31 PM - Drive Type : Fixed Drive (HDD)
Total Cylinders are : 19457
Tracks per Cylinder are : 255
Sectors per Track are : 63
Bytes Per Sector are : 512

6/25/2010 12:29:31 PM - WARNING!!! YOU ARE ABOUT TO WIPE OUT ALL DATA ON DISK

\\?\usbstor#disk&ven_wd&prod_314as__external&rev_1.75#355643365a324d3220202020202020&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
\\.\PhysicalDrive1
Drive Letter: E:

A single Fat32 - LBA partition will be created
Standard XP boot code will be written to the MBR
E: will be formatted as Fat32 - LBA
Grub4dos bootsector/bootloader will be used
All files/folders from C:\UBCD\BartPE will be copied to E:
A 40MB image file will be created and mounted on drive letter Z: then formatted as Fat32 - LBA

ARE YOU SURE YOU WANT TO CONTINUE ???

6/25/2010 12:29:31 PM - Writing boot code to the MBR
6/25/2010 12:29:33 PM - Clearing Partition Table... (writing 0x00 to bytes 446 through 512 of MBR)
6/25/2010 12:29:33 PM - Clearing 0x55,AA signature from first 63 sectors... (writing 0x00,00 to bytes 511 and 512 of first 63 sectors)

6/25/2010 12:29:36 PM - Writing new partition...

6/25/2010 12:29:36 PM - Setting active/bootable flag for first partition (writing 0x80 to byte 447 of MBR)
6/25/2010 12:29:36 PM - Setting starting head for first partition to 1 (writing 0x01 to byte 448 of MBR)
6/25/2010 12:29:36 PM - Setting starting sector for first partition to 1 (writing 0x01 to byte 449 of MBR)
6/25/2010 12:29:36 PM - Setting starting cylinder for first partition to 0 (writing 0x00 to byte 450 of MBR)
6/25/2010 12:29:36 PM - Setting partition type for first partition to Fat32-LBA (writing 0x0C to byte 451 of MBR)
6/25/2010 12:29:36 PM - Setting ending head for first partition to 254 (writing 0xFE to byte 452 of MBR)
6/25/2010 12:29:36 PM - Setting ending sector for first partition to 63 and ending cylinder to 19456 (writing 0x3F,4C to bytes 453 and 454 of MBR)
6/25/2010 12:29:36 PM - Setting first sector of first partition to 63 (writing 0x3F,00,00,00 to bytes 455 through 458 of MBR)
6/25/2010 12:29:36 PM - Partition Length = 312576642 (155648 MB)
6/25/2010 12:29:36 PM - Setting total length for first partition (writing 0x82,8A,A1,12 to bytes 459 through 462 of MBR
6/25/2010 12:29:36 PM - Updating cached partition table...

6/25/2010 12:29:36 PM - Partition Table Successfully Updated.
6/25/2010 12:29:36 PM - Running C:\Documents and Settings\Tech\Desktop\touchdrv.exe
6/25/2010 12:29:36 PM - Extracting mkdosfs.exe

6/25/2010 12:29:36 PM - Formatting volume E: as Fat32 - LBA

6/25/2010 12:29:36 PM - C:\Documents and Settings\Tech\Desktop\mkdosfs.exe -v -F 32 -n UBUSB E: 312576642

6/25/2010 12:37:42 PM - Copying files/folders from C:\UBCD\BartPE to E:

6/25/2010 12:47:05 PM - Renaming E:\i386 to E:\minint
6/25/2010 12:47:05 PM - Creating E:\winbom.ini
6/25/2010 12:47:07 PM - Running C:\Documents and Settings\Tech\Desktop\touchdrv.exe
6/25/2010 12:47:07 PM - Running C:\Documents and Settings\Tech\Desktop\touchdrv.exe
6/25/2010 12:47:37 PM - Deleting existing C:\Documents and Settings\Tech\Desktop\iso_root\kicker.img
6/25/2010 12:47:37 PM - Creating Partition Table For 40MB kicker.img
6/25/2010 12:47:37 PM - Writing partition table from \\.\PhysicalDrive1 to unused space in kicker.img mbr
6/25/2010 12:47:37 PM - Writing 40MB kicker.img partition table to unused space in \\.\PhysicalDrive1 mbr
6/25/2010 12:47:37 PM - ImDisk service is already installed on this computer
6/25/2010 12:47:37 PM - ImDisk service is already running on this computer
6/25/2010 12:47:37 PM - C:\Documents and Settings\Tech\Desktop\imdisk.exe -a -f C:\Documents and Settings\Tech\Desktop\iso_root\kicker.img -m Z: -v 1


Thanks

[pcuser]

@burnzarelli,

Don't run UBUSB from your desktop or any other location that has spaces in the path, run it from C:\UBCD instead.

Thanks for the report, I'll try and fix this in the next version.

[burnzarelli]

pcuser, on 25 June 2010 - 06:29 PM, said:

@burnzarelli,

Don't run UBUSB from your desktop or any other location that has spaces in the path, run it from C:\UBCD instead.

Thanks for the report, I'll try and fix this in the next version.

That was it! Thanks
Love this tool!